CTSFD
Back to Builds

pretty good build to grind for the chally 2/ chally atdu

Tier 10 Medium Tank 3.2 (2)
Created 1 month ago
Loadout
Hull
Challenger 1 - hull Tier 8 in Cursed Tank Simulator
Challenger 1 T8
hull
yen currency 1,530,900
:(
Blueprints
Turret
Challenger 1 - turret Tier 10 in Cursed Tank Simulator
Challenger 1 T10
turret
yen currency 8,687,000
:(
Blueprints
Gun
130mm TG50 - gun Tier 11 in Cursed Tank Simulator
130mm TG50 T11
gun
token currency 8
:(
Daily Reward
Description

the hull is BUNS, still pretty usable if u have skill:3
i did a 9-3 game and a 6-1 with this built so its pretty good (even me as a person who sucks at this game could do that on 30fps and 400 ping)

Ratings & Reviews (2)

Fun

No ratings yet

Unrated
5
0
4
1
3
1
2
0
1
0

to rate this build.

1 month ago

I experienced that after 2 matches BUT I think if possible we should use a different hull type because the challenger-1s armor can actually be penetrated by tier 7 cannon.Besides i think its speed is sufficient(but the TYPE96A hull type might perform better) Additionally, this combination also has some other weaknesses,such as a relatively long reload time of about 11 seconds. However, actually,if I were someone with limited budget options, this wouldn't be bad for me; in fact, it's god

Helpful?
3 comments
VA
vaxilovich

i need to use the chally 1 cuz im grinding for the chally 2 read the name of the build and description cro </3 and ik the chally 1 hull is buns the side armor and lfp is week asf

1 month ago
TE
teagreen00

Yeah, I know but it’s actually not bad at all. If you have the skill, using it is still a good idea. However in my opinion an 11second reload time isnt worth the trade off for 460mm of penetration, the reason is that the lower front plates of most tier 10 tanks have weak spots that can be penetrated by rounds with 340mm of penetration or more so sacrificing that much reload speed just to get 460mm of penetration isn't really worth it Just change cannon

1 month ago
VA
vaxilovich

i think switching the gun too the l/44 is a good idea cuz the reload speed is significantly lower, i just bought the l/44 so i made the mistake of putting the tg 50 here

1 month ago
Helpful?
0 comments
Build Facts
Recommended Tier Tier 10
Class Medium Tank
Yen Cost
10,217,900 yen currency
Token Cost
8 token currency
Similar Builds
hull
turret
gun

It costs about 12 million 💴 if you own this turret

Medium Tank Tier 10
3.6 (2)
hull
turret
gun

T9-10 EXM-2AG Build for MK2E Grind

turret can be swapped for something like the chieftain SID or any other, i only used the beelzebub since it has no turret crew so it’s harder to take out in 1 shot. Turret Armor isn’t that good though. Also good if your grinding for the mk2e, open to suggestions for future builds

Medium Tank Tier 9-10
3.6 (2)
hull
turret
gun

Anti-Radar Guided Missile Tank (AT-RGMT) (K15 Mirage)

This tank has a very low RCS / Radar Cross Section, with a Definitive high APS velocity intercept, Insane Mobility, and Decent Armor + Radar. It has decent smoke capacity, lws, and HULL AIM Capabilities. It also has a great 105 GT-7 APFSDS Gun, which has insane Penetrations + No relevant nerfs to the gun. Reload rate is also short which can significant increase the chances of survival. Weaknesses: INSANELY PENETRABLE, NO BLOWOUT, MINIMAL AMMO STORAGE

Medium Tank Tier 10
3.4 (2)
hull
turret
gun

Medium yoyota

best for short and mid range bad at long range due to tight spall cone it also has a 6 round clip

Medium Tank Tier 10
3.4 (2)
hull
turret
gun

Fearmongering HDR grinder

use this to grind the hdr and UFP those pesky T-64Ks this thing rocks those things despite its stated pen on aphe and the pen stated thats needed to pen the ufp

Medium Tank Tier 10
3.1 (1)
hull
turret
gun

chally hesh slinger

good armor and can destroy almost any tank if you know where to aim

Medium Tank Tier 10
3.1 (1)